Free Shipping to United States 🇺🇸
Return to previous page
eo Genius spec
|
MODEL ORDER CODE
|
EG001
|
EG002
|
EG003
|
EG004
|
|---|---|---|---|---|
|
Description
|
eoGenius 16A 1-Phase Charger - Locking Socket
|
eoGenius 32A 1-Phase Charger - Locking Socket
|
eoGenius 16A 3-Phase Charger - Locking Socket
|
eoGenius 32A 3-Phase Charger - Locking Socket
|
|
ELECTRICAL DATA
|
||||
|
Rated Power
|
3.6kW
|
7.2kW
|
11kW
|
22kW
|
|
Charging Current
|
6A to 16A (variable)
|
6A to 32A (variable)
|
6A to 16A (variable)
|
6A to 32A (variable)
|
|
Rated Current
|
16A max.
|
32A max.
|
16A max.
|
32A max
|
|
Nominal Supply
|
230VAC 50Hz
|
400VAC 50Hz
|
||
|
Supply Connections
|
L1, N, PE 2.5 - 10mm
|
L1, L2, L3, N, PE 2.5 - 10mm2
|
||
|
Over Current Protection
|
20A Supply
|
40A Supply
|
20A Supply
|
40A Supply
|
|
Earth Leakage Protection
|
A dedicated 30mA Type A RCD must be used on the supply circuit. Where there is risk of DC leakage from vehicle a Type B or Type EV RCD must be used.
|
|||
|
Thermal Protection
|
Output limited if unit temperature is > 85°C
|
|||
|
Standby Power Consumption
|
~3W
|
|||
|
Status Indication
|
3 colour EO logo LED indicator (green, blue, red)
|
|||
|
Charging Mode
|
Mode 3 (IEC 61851-1 / SAE J1772 compliant communication protocol)
|
|||
|
Socket
|
Mennekes branded IEC 62196 Type 2, IP54 hinged lid, locking pin Manual override pin release key.
|
|||
|
Supply Cable Entry
|
Ø20mm or Ø25mm hole drilled at site into wall plate connector.
|
|||
|
MECHANICAL DATA
|
||||
|
Dimensions (H x W x D)
|
360mm x 165mm x 155mm
|
|||
|
Unit Weight
|
<3kg
|
|||
|
Mounting Location
|
Wall or Post Mounted using wall plate, Indoor or Outdoor (permanent mounting).
|
|||
|
Ambient Temperature
|
-30°C to +50°C
|
|||
|
Operating Humidity
|
5 to 95%
|
|||
|
Enclosure
|
PC / ABS UV stabilised (UL94 HB Fire Rated)
|
|||
|
Protection (Enclosure / Socket)
|
IP66 / IP54
|
|||
|
Standard Finish
|
Natural White (RAL9016)
|
|||
|
COMMUNICATIONS
|
||||
|
|
Each eoGenius has a 3m RS485 flying lead pre-fitted. RS485 connectivity for communications with eoHub for eoCloud access. eoHub requires active internet connection & firewall configuration for eoCloud.
|
|||
|
COMPLIANCE
|
||||
|
|
CE Marked, EMC Directive 2014/30/EU, IEC 61851-1, IEC 61851-22, IEC 62196-2
|
|||
|
OPTIONS
|
||||
|
|
Static, dynamic & scheduled active load management when installed with eoHub and current transformers. For post mounting refer to eoPost datasheet. Unbranded, non-locking standard Type 2 socket available upon request.
|
|||
In no event will EO Charging or evTiger.com accept any liability for any loss, costs or damage consequential on the use and/or misuse of our
hardware or software products except and only to the extent that this is caused by our negligence.